IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 80 / 184

66
IBM® xSeries 360: User’s Reference
Remote Supervisor Adapter component locations
The following illustration shows the connectors and lights on the Remote Supervisor
Adapter.
Removing the server top cover and bezel
Complete the following steps to remove the server top cover and bezel:
1. Read the safety precautions beginning on page 53, and “Handling static-sensitive
devices” on page 52.
2. Lift the plastic cover-release latch on the top cover. Slide the top cover toward the
rear of the server approximately one inch, and then lift it off the server and set it
aside.
Attention: For proper cooling and airflow, replace the top cover before turning on
the server. Operating the server for extended periods of time (over 30 minutes)
with the top cover removed might damage server components.
P - P
Ethernet link
LED (green)
Ethernet port
(RJ-45)
Ethernet activity
LED (green)
Error LED
(amber)
External power
supply connector
Serial port
(COM)
ASM Interconnect port
(RJ-14)
Power LED
(green)
System board
connector
(J5)
Lithium
battery
Top cover
Cover release latch
Bezel
Level 2 diagnostic panel