IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 89 / 184

Chapter 5. Installing options
75
2. Turn off the server, disconnect all power cords and external cables, and remove
the top cover and bezel (see “Removing the server top cover and bezel” on page
66).
3. Release two connector retaining clips and unplug the wide ribbon cable between
the media interposer card and the hard-disk drive backplane where it plugs into
the backplane.
4. Pull out the media tray release knob at the left of the CD-ROM drive and slide the
media tray out the front of the server.
5. To detach the diskette drive from the media tray:
a. Unplug the narrow ribbon cable between the media interposer card and the
diskette drive where it plugs into the diskette drive.
b. Release the diskette drive retention spring on the right side of the tray, lift up
the right side of the diskette drive, and separate the drive from the alignment
pins on the tray.
Media tray
with diskette drive
and CD-ROM drive
Media tray
release knob
Wide ribbon cable
Diskette drive
CD-ROM drive
Media interposer
card
Media tray
Diskette drive
retention spring
CD-ROM drive
retention spring
Narrow ribbon
cable