IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 45 / 184

Chapter 3. Configuring the server
31
2. The utility starts automatically, displaying the Remote Supervisor Utility window.
3. Use the Up Arrow and Down Arrow keys (
↑
and
↓
) to select Configuration
Settings ; then, press Enter. The Configuration Settings window opens.
4. Use the arrow keys to select Ethernet Settings ; then, press Enter.
The Ethernet Settings window opens, as shown in the following illustration.
Note: The values in the window are only examples; your settings will be different.
5. Use the arrow keys to navigate to each field. Your system administrator can
provide the information for the following fields:
Network Interface
The default value is Enabled; verify that it is still set to Enabled.
IP Address
Type the IP address of the Remote Supervisor Adapter.
Subnet Mask
Type the subnet mask used by the Remote Supervisor Adapter. The
default value is 255.255.255.0.
Gateway
Type the IP address of the gateway.
Host Name
Type the hostname of the Remote Supervisor Adapter. The default
hostname is ASMA<
burned-in MAC address> .
For detailed information about the Ethernet settings, see the Remote Supervisor
Adapter User’s Guide on the xSeries 360 Documentation CD.
6. Change the DHCP Setting field to Disabled . The default value is Enabled.
7. Press F6 to apply the change.
8. Press Esc. In the Warning window that opens, press Enter to restart the Remote
Supervisor Adapter.
9. Press Esc to return to the Configuration Settings window.
If you need to configure the serial port, go to “Configuring the serial port for text-
based remote access” on page 32.
10. Press Esc to return to the Utility program main window.
11. Use the arrow keys to select Exit Utility from the menu or press Esc to close the
Utility program.
12. Remove the diskette from the diskette drive. The server restarts automatically.