IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 130 / 184

116
IBM® xSeries 360: User’s Reference
089 Microprocessor Failed Invalid microprocessor in
socket
xyz or BIOS setup
problem
(where xyz identifies the
microprocessor that is causing
the error message)
1. Check the System
Error log for related
error messages.
2. If the server does not
have the most current
level of BIOS code
installed, update the
BIOS code.
3. If the problem remains,
replace the
xyz
microprocessor and
run the test again.
If the problem remains, call
for service.
Processor in socket id xyz is
installed but not functioning
(where xyz identifies the
microprocessor that is causing
the error message)
Microprocessor in socket id
xyz
(where xyz identifies the
microprocessor that is causing
the error message)
Note: The error light
associated with the
microprocessor may
be lit.
1. Reseat the
microprocessor.
2. If the problem remains,
replace the
microprocessor.
If the problem remains, call
for service.
Microprocessor in socket id
xyz is defective
(where xyz identifies the
microprocessor that is causing
the error message)
Replace the
microprocessor.
If the problem remains, call
for service.
Test setup error. Application
microprocessor not installed
or BIOS setup problem 1. Verify that the
application
microprocessor is
installed and seated
correctly.
2. If the server does not
have the most current
level of BIOS code
installed, update the
BIOS code.
3. If the problem remains,
replace the application
microprocessor and
run the test again.
If the problem remains, call
for service.
VRM corresponding to
Microprocessor in socket
xyz
is defective
(where xyz identifies the
microprocessor whose VRM is
causing the error message)
Replace the VRM.
If the problem remains, call
for service.
VRM corresponding to
Microprocessor in socket id
xyz is not installed
(where xyz identifies the
microprocessor whose VRM is
causing the error message)
Install a VRM.
If the problem remains, call
for service.
Code Function Result Description Action