IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 48 / 184

34
IBM® xSeries 360: User’s Reference
5. Use the arrow keys to navigate to each field. Verify the values in the following
fields:
Network Interface
The default is Disabled. Change this field to Enabled.
IP Address
The default value is 192.96.1.1. You can use the default value or another
value, but the server must be able to establish a connection to that
address. The default IP address (local and remote) is easily
reconfigurable.
Subnet Mask
The default value is 255.255.255.255.
Line Type
The value is set to PPP.
Remote IP Address
The default value is 192.96.1.2.
Authentication Protocol
The default is CHAP then PAP. Make sure that the value in this field
matches your client settings.
For detailed information about the PPP settings, see the information about
configuring PPP access over a serial port in the
Remote Supervisor Adapter
User’s Guide on the xSeries 360 Documentation CD.
6. Press F6 to apply the changes.
7. Press Esc. In the Warning window that opens, press Enter to restart the Remote
Supervisor Adapter.
8. Press Esc to return to the Configuration Settings window.
If you need to configure the serial port, go to “Configuring the serial port for text-
based remote access” on page 32.
9. Press Esc to return to the Utility program main window.
10. Use the arrow keys to select Exit Utility from the menu or press Esc to close the
Utility program.
11. Remove the diskette from the diskette drive. The server restarts automatically.