IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 94 / 184

80
IBM® xSeries 360: User’s Reference
Complete the following steps to install a microprocessor:
1. Read the safety precautions beginning on page 53, and “Handling static-sensitive
devices” on page 52.
2. Turn off the server, disconnect all power cords and external cables, remove the
top cover (see “Removing the server top cover and bezel” on page 66).
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, see “Handling static-sensitive devices” on page 52.
3. Lift off the microprocessor heat sink stabilizer as shown in the following illustration
and determine the socket where the microprocessor is to be installed.
Microprocessor
connector 1 (U11)
Microprocessor
connector 2 (U23)
Microprocessor
connector 3 (U12)
Microprocessor
connector 4 (U22)
Microprocessor 4
VRM connector
(J29)
Microprocessor 2
VRM connector
(J30)
Microprocessor 1
VRM connector
(J2)
Microprocessor 3
VRM connector
(J3)