IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 81 / 184

Chapter 5. Installing options
67
3. Press the bezel release latches at the top edge of the bezel, and pull the top of
the bezel slightly away from the server.
4. Pull the bezel up to release the two tabs at the bottom edge of the bezel. Store
the bezel in a safe place.
Working with adapters
The following illustration shows the location of the six hot-plug PCI-X adapter
expansion slots, the Remote Supervisor Adapter slot, and their related components
on the system board.
This server supports the following adapter configurations:
• Bus A (hot-plug)
— Four 66 MHz 64-bit PCI-X adapters (slots 3 through 6)
— Two 66 MHz 64-bit PCI adapters (slots 3 and 4)
— Four 33 MHz 64-bit PCI adapters (slots 3 through 6)
• Bus B (hot-plug)
— One 133 MHz 64-bit PCI-X adapter (slot 1)
— Two 100 MHz 64-bit PCI-X adapters (slots 1 and 2)
— Two 66 MHz 64-bit PCI-X adapters (slots 1 and 2)
— Two 66 MHz 64-bit PCI adapters (slots 1 and 2)
— Two 33 MHz 64-bit PCI adapters (slots 1 and 2)
To the right of PCI-X slot number 1 (as viewed from the front), there is a 33 MHz 64-bit
slot dedicated to the Remote Supervisor Adapter.
PCI-X slot 1
PCI-X slot 2
PCI-X slot 3
PCI-X slot 4
PCI-X slot 5
PCI-X slot 6
PCI power LED
Remote
Supervisor
Adapter slot
(J40)
PCI attention LED