IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 131 / 184

Chapter 6. Solving Problems
117
091 RXE expansion
port Failed Ping rate failure Verify that the cables are
connected correctly and
securely and try again.
If the problem remains, call
for service.
Receive threshold exceeded
Transmit threshold exceeded
Connection error
165 Remote
Supervisor
Adapter Failed Remote Supervisor Adapter
built-in system test (BIST)
indicates failed tests. Disconnect all server and
option power cords from
the server, wait 30
seconds, reconnect, and
try again.
If problem remains, call for
service.
Unable to restart Remote
Supervisor Adapter.
I
2
C Bus Error. See System
Error log for details from both
SERVPROC and DIAGS
messages.
I
2
C Bus xyz defective or
devices on this bus are
functioning incorrectly.
Remote Supervisor Adapter is
temporarily unreachable or not
installed.
166 System
management Failed Remote Supervisor Adapter
may be busy 1. Ensure that you have
downloaded and
installed the most
current level of
Remote Supervisor
Adapter code, and try
again.
2. Ensure that the
Remote Supervisor
Adapter is fully
plugged in and that the
internal cable is firmly
connected between
the adapter and the
system board, then try
again.
3. Disconnect all server
and all option power
cords from the server,
wait 30 seconds,
reconnect the cords,
then try again.
If problem remains, call for
service.
ASM communication failed
I
2
C bus failure
I
2
C cable disconnected
Restart ASM error
System management failure
Remote Supervisor Adapter
BIST failed
System management
hardware on system board
failed
175 System thermal Failed Fan # n
(where n is the number of the
failing fan)
Note: The fan LED on the
diagnostic LED panel
may be lit.
Replace the indicated fan.
Temperature sensed on
system board is out of range If one of the fan LEDs on
the diagnostic LED panel is
on, remove top cover and
replace fan whose LED is
lit. If the problem remains,
call for service.
Code Function Result Description Action