IBM Eserver xSeries 360 Type 8686, User Reference Manual

Page: 50 / 184

36
IBM® xSeries 360: User’s Reference
The non-interactive method for installing the ASM device drivers accepts the
default values for any window prompts that appear. You are prompted to respond
only if an error occurs during installation.
• Interactive
The normal (interactive) method for installing the ASM device drivers prompts you
with instructions and waits for you to respond before continuing with the
installation.
Note: If IBM Netfinity Director, IBM Director, UM Services, or IBM Netfinity Manager
is running on the server, stop the system-management application before
proceeding.
Using the non-interactive method: Complete the following steps to use the non-
interactive method.
1. Open a Windows NT command prompt; then, type one of the following
commands:
• If the installation is from a diskette, type:
A:\NT\SETUP -q
(where A is the drive letter assigned to the diskette drive).
Press Enter.
• If the installation is from a CD, type:
D:\DD\NT\SETUP -q
(where D is the drive letter assigned to the CD-ROM drive).
Press Enter.
2. Follow the instructions that appear in the window.
3. Go to “Configuring the remote control password” on page 37.
Using the interactive method: Complete the following steps to use the interactive
method.
1. Open a Windows NT command prompt; then, type one of the following
commands:
• If the installation is from a diskette, type:
A:\NT\SETUP
(where A is the drive letter assigned to the diskette drive).
Press Enter.
• If the installation is from a CD, type:
D:\DD\NT\SETUP
(where D is the drive letter assigned to the CD-ROM drive).
Press Enter.
2. Follow the instructions that appear in the window.
3. Continue with “Configuring the remote control password” on page 37.
Installing Novell NetWare ASM device drivers: Complete the following steps to install
the ASM device drivers for the Novell NetWare operating system:
Note: If IBM Netfinity Director, IBM Director, or IBM Netfinity Manager is running on
the server, stop the system-management application before proceeding.
1. From a system console session, type one of the following commands:
• If the installation is from a diskette, type: