KN-100
Quick Start (P/N: 2900-300958QS REV 1)
P/N:
2 9 0 0 - 3 0 0 9 5 8 QS
Rev: 1
Scan for full manual
KN-100 Quick Start Guide
This guide helps you install and use your
KN-100
for the first time.
www.kramerav.com/downloads/KN-100
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
KN-100
Kramer Network Server
1 Set of rack ears
2 Power cord types (US + European)
1 Quick start guide
Step 2: Get to know your KN-100
#
Feature
Function
1
Indicator LEDs
Flashes to indicate fan failure.
Lights continuously to indicate system overheat.
Flashes when there is network activity on LAN port 2.
Flashes when there is network activity on LAN port 1.
Flashes to indicate hard drive activity.
Lights when the device is powered.
2
Reset Button
Press to reboot the system.
3
Power Button
Press to toggle setting the device to standby mode / turning the device on.
To turn the power off, disconnect the power connector from the mains.
4
Power Socket
Connect to the power cord and to the mains electricity.
5
RS-232 9-pin D-sub Connector
Connect to a system controller.
6
USB 2.0 Ports (2)
Connect to a keyboard and mouse (if required).
7
IPMI (Intelligent Platform Management
Interface) LAN RJ-45 Connector
N/A
8
USB 3.0 Ports (2)
Connect to USB devices.
9
LAN 1 ETHERNET RJ-45 Connector
Connect to the Ethernet.
10
LAN 2 ETHERNET RJ-45 Connector
Connect to the Ethernet.
11
VGA 15-pin HD Port
Connect to a display.