IBM 4232 Model 302, Manual

Page: 43 / 274

Preparing to Load Forms
To prepare to load forms in the F1 forms device, follow these steps:
1. Slide the print head to the far left side of the printer.
2. Loosen the blue forms tension knob by turning it
counterclockwise, and then move the blue forms tension knob
towards the bottom of the printer until you see the
*
below the
number 1.
B l u e F o r m s
T e n s i o n K n o b
Note: Moving the blue forms tension knob to the
*
position
lets you load forms.
3. Unlock the blue locking lever on the right tractor. Slide the
tractor to the extreme right.
B l u e L o c k i n g L e v e r
Chapter 1. Setting Up the 4232 Printer Model 302
1-21