IBM 4232 Model 302, Manual

Page: 232 / 274

Problem: Printing off the form or out of the desired area with
the Document Insertion Device (F3) only
1: The form is skewed or the vertical adjustments are not correct.
Solution: Be sure that the forms are straight and making contact
with both the right and left feed rollers.
2: The right roller assembly is adjusted incorrectly.
Solution: Unlock and move the right tractor to obtain proper
form width.
3: The characters per inch (CPI) or lines per inch (LPI) settings are
incorrect.
Solution: Check with your system operator for the correct CPI
and LPI settings.
4: The forms size is too small.
Solution: Use the correct size forms.
Problem: Characters are off registration
1: The first print position is adjusted incorrectly.
Solution: Check your settings for the left margin and the top of
form position. See Chapter 1, “Setting Up the 4232 Printer
Model 302” for information on adjusting these settings.
If none of the previous problems apply to your forms problem, or if
the solution does not solve your problem, be sure that you do the
forms device inspection steps (see “Forms Device Inspection” on
page B-24).
B-32
User’s Guide Model 302