IBM 4232 Model 302, Manual

Page: 244 / 274

Positioning Forms
When you design the forms layout for your printer, keep the physical
dimensions and forms quality in mind. See Figure C-1 on
page C-10 and Figure C-2 on page C-11 and the following
information to obtain best results when printing.
.A/
Form Width
Maximum: 381 mm (15 in.) for F1, F2, or F3
356 mm (14 in.) for F4
Minimum: 76.2 mm (3 in.) for F1, F2, or F3
127 mm (4 in.) for F4
.B/
Form Length
Maximum: 356 mm (14 in.)
Minimum: 76.2 mm (3 in.) for F1 and F2
Minimum: 177.8 mm (7 in.) for F3
Minimum: 127 mm (5 in.) for F4 (Bin 1)
Minimum: 203 mm (8 in.) for F4 (Bin 2)
Minimum: 279 mm (11 in.) for F4 (Bin 3)
Minimum: 127 mm (5 in.) for F4 (Bin 4)
.C/
First Print Position
For continuous forms:
Ÿ The minimum distance between the center of the margin holes
|
and the start of the first print position used is 1.27 mm (0.05 in.).
Ÿ
The maximum distance between the center of the margin holes
and the start of the first print position used is 48.5 mm (1.91 in.).
For cut forms:
Ÿ The minimum distance between the left edge of the form and the
|
start of the first print position used is 1.27 mm (0.05 in.).
Ÿ
The maximum distance between the left edge of the form and
the start of the first print position used is 48.5 mm (1.91 in.).
C-8
User’s Guide Model 302