FEATURES OF YOUR HYUNDAI
1- 48
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH
Turn Signal Operation
Pulling down on the lever causes the turn signals
on the left side of the car to blink. Pushing
upwards on the lever causes the turn signals on
the right side of the car to blink. As the turn is
completed, the lever will automatically return to
the center position and turn off the turn signals at
the same time. If either turn signal indicator light
blinks more rapidly than usual, goes on but does
not blink, or does not go on at all, there is a
malfunction in the system. Check for a burned-
out fuse or bulb or see your Hyundai dealer.
B340B01A-AAT
Lane Change Signal
B340B01HP
To indicate a lane change, move the lever up or
down to a point where it begins flashing.
The lever will automatically return to the center
position when released.
To turn on the rear fog lights, push the switch.
They will light when the headlight switch is in the
second position or the front fog light is turned on
and the key is in the "ON" position.
B360A01HP-GAT
REAR FOG LIGHT SWITCH (If installed)
B360A01HP
B360B01HP
B360B01Y-AAT
FRONT FOG LIGHT SWITCH
To turn on the front fog lights, place the switch in
the "ON" position. They will light when the head-
light switch is in the first or second position.
