CONTROLS AND EQUIPMENT
1- 19
B220C01A-EAT
To Release the Seat Belt
When you want to release the seat belt, press
the button in the locking buckle.
WARNING:
The centre lap belt latching mechanism is
different from those for the rear seat shoul-
der belts. When fastening the rear seat shoul-
der belts or the centre lap belt, make sure
they are inserted into the correct buckles to
obtain maximum protection from the seat
belt system and assure proper operation.
HHP231-1
B220B01A-AAT
Adjusting Your Seat Belt
HTB226
With a 2-point static type seat belt, the length
must be adjusted manually so it fits snugly around
your body. Fasten the belt and pull on the loose
end to tighten. The belt should be placed as low
as possible on your hips, not on your waist. If the
belt is too high, it could increase the possibility of
your being injured in an accident.
Correct
Shorten
Too high
B220D01HP-GAT
SEAT BELTS - Centre Rear Seat 3-
Point System With Emergency Lock-
ing Retractor (Not all models)
1. Pull the seatbelt out of the roof panel.
2. Before fastening the rear seat centre belt,
confirm the metal tab (a) and buckle (b) are
latched together.
3. After confirming that (a) and (b) are latched,
pull the seat belt out of the retractor and
insert the metal tab (c) into the buckle (d).
B220D01HP
(a)
(b)
(c)
(d)
