FEATURES OF YOUR HYUNDAI
1- 21
To fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There will
be an audible "click" when the tab locks into the
buckle.
The seat belt automatically adjusts to the proper
length only after the lap belt is adjusted manually
so that it fits snugly around your hips. If you lean
forward in a slow, easy motion, the belt will
B180A01L
B180A02Y-GAT
SEAT BELTS-3-Point System with
Emergency Locking Retractor
(If installed)
To Fasten Your Belt
forward in a slow, easy motion, the belt will
extend and let you move around. If there is a
sudden stop or impact, however, the belt will lock
into position. It will also lock if you try to lean
forward too quickly.
B200A01A-GAT
Adjusting Your Seat Belt
B200A01L
You should place the belt as low as possible on
your hips, not on your waist. If located too high on
your body, the chances of sliding out from under
it and suffering serious injury or death are in-
creased. Both arms should not be under or over
the belt. Rather, one should be over and the other
under, as shown in the illustration.
extend and let you move around. If there is a
sudden stop or impact, however, the belt will lock
into position. It will also lock if you try to lean
forward too quickly. Check to make sure that the
belt is properly locked and that the belt is not
twisted.
B210A01A-AAT
To Release the Seat Belt
B210A01L
The seat belt is released by pressing the release
button in the locking buckle. When it is released,
the belt should automatically draw back into the
retractor.
If this does not happen, check the belt to be sure
it is not twisted, then try again.
