FEATURES OF YOUR HYUNDAI
1- 67
B670B01A-AAT
Fan Speed Control (Blower Control)
B670B01HP
This is used to turn the blower fan on and off and
to select the fan speed.
B670A01HP-GAT
HEATING AND VENTILATION
B670A01HP
2
3
1
4
1. Fan speed control.
This is used to turn the fan on and select the
fan speed.
2. Air intake control.
This allows you to select fresh outside air or
recirculation inside air.
3. Temperature control.
This is used to turn the heating system on and
off and to select the degree of heating de-
sired.
4. Air flow control.
This is used to direct the flow of air.
Air can be directed to the floor, dashboard
outlets, or windshield. Five symbols are used
to represent Face, Bi-Level, Floor, Floor-
Defrost and Defrost air positions.
B670C01HP
The blower fan speed, and therefore the volume
of air delivered from the system, may be con-
trolled manually by setting the blower control
between the "1" and "4" position.
B670C01Y-AAT
Air Intake Control
This is used to select fresh outside air or recircu-
lating inside air.
Fresh
Recirculation
With the " " mode selected, air enters the
vehicle from outside and is heated or cooled
according to the other functions selected.
With the " " mode selected, air from within the
passenger compartment is drawn through the
heating system and heated or cooled according
to the other functions selected.
o Pay particular attention to the driving con-
ditions whenever using the cruise control
system.
o During cruise-control driving with a
manual transmission vehicle, do not shift
into neutral without depressing the clutch
pedal or the engine will be overrevved. If
this happens, depress the clutch pedal or
release the main switch.
o During normal cruise control operation,
when the "SET" button is activated or
reactivated after applying the brakes, the
cruise control will energize after approxi-
mately 3 seconds. This delay is normal.
There are four controls for the heating and cool-
ing system. They are:
