FEATURES OF YOUR HYUNDAI
1- 8
Park the car and stop the engine. Arm the system
as described below.
1) Remove the ignition key from the ignition
switch.
2) Make sure that the engine hood and tail gate
are closed and latched.
3) Lock the doors using the transmitter of the
keyless entry system.
After completion of the steps above, the turn
signal lights will blink once to indicate that the
system is armed.
NOTE:
1) If any door, tail gate or engine hood re-
mains open, the system will not be armed.
2) If this happens, rearm the system as de-
scribed above.
B070B02HP
LOCK
UNLOCK
Type B
B070A01A-AAT
THEFT-ALARM SYSTEM (If installed)
This system is designed to provide protection
from unauthorized entry into the car. This system
is operated in three stages: the first is the "Armed"
stage, the second is the "Alarm" stage, and the
third is the "Disarmed" stage. If triggered, the
system provides an audible alarm with blinking of
the turn signal lights.
B070B01O-AAT
Armed Stage
B070B01HP
LOCK
B040G01HP-AAT
Central Door Locks
B040G01HP
The central door locking switch is located on the
driver's arm rest. It is operated by depressing the
door lock switch.
NOTE:
o When pushing the front portion of the
driver's door lock switch, all vehicle doors
will lock. If any door is open when the
switch is depressed, the door will remain
locked when closed.
o When pushing the rear portion of the
switch, all vehicle doors will unlock.
o The central door locking is operated by
turning the key toward the front or rear of
the vehicle.
UNLOCK
LOCK
UNLOCK
Type A
