DRIVING YOUR HYUNDAI
2- 3
YC030A1-E
STEERING WHEEL LOCK
When the ignition key is removed, the steering
wheel lock will be activated. The lock only
engages at one position of the steering wheel
and therefore it will be possible to turn the wheel
until this position is reached. It is not, however,
necessary for the lock to be engaged before
leaving the vehicle since in the event of at-
tempted unauthorized removal, the lock will
engage when attempts are made to steer the
vehicle.
Should it be difficult to turn the key from the
"LOCK" position, it may be found that rocking
the steering wheel to and fro whilst turning the
key will assist.
CAUTION:
Never remove the key from the ignition lock
whilst the vehicle is in motion since the
steering mechanism lock will be activated.
"START"
The engine is started in this position. It will
crank until you release the key.
NOTE:
Do not hold the key in the "START" position
for more than 15 seconds.
"ON"
When the key is at the "ON" position, the
ignition and all accessories are available for
use. If the engine is not running, the key should
not be left at this position since the battery will
become discharged and damage to the ignition
system may also result. For information regard-
ing engine starting, refer to "STARTING THE
ENGINE".
"ACC"
When the ignition key is at the "ACC" position,
the radio and other accessories may be used.
"LOCK"
The ignition key may only be inserted or re-
moved at this position.
NOTE:
The ignition key can only be removed if the
transmission selector is at the "P" position
(automatic transmission only).
C070C01A-AAT
To Remove the Ignition Key
1. Turn the ignition key to the "ACC" position.
2. Simultaneously push and turn the ignition
key counterclockwise from the "ACC" posi-
tion to the "LOCK" position.
3. The key can be removed in the "LOCK"
position.
C070C01E
LOCK
ACC
ON
START
