CONTROLS AND EQUIPMENT
1- 14
B100A01HP-EAT
SEAT WARMER (Not all models)
The seat warmer is provided to warm the front
seats during cold weather. With the ignition key
in the "ON" position, push either of the switches
to warm the driver's seat or the passenger's
seat.
During mild weather or under conditions where
the operation of the seat warmer is not needed,
keep the switches in the "OFF" position.
o The seat warmer will not operate if ambient
temperature is higher than 98.6 ± 37.4°F
(37 ± 3°C).
o If the seat warmer doesn't work when ambi-
ent temperature is lower than 82.4 ± 37.4°F
(28 ± 3.5°C), it must be checked by autho-
rized dealer.
B100A01HP.EAG
HHP231-2
B090A01HP-EAT
REAR SEAT
Adjustable Headrests
Headrests are designed to help reduce the risk
of neck injuries.
To raise the headrest, pull it up. To lower it,
push it down while pressing the lock knob.
WARNING:
o For maximum effectiveness in case of an
accident, the headrest should be adjusted
so the top of the headrest is at the same
height as the top of the occupant's ears.
The use of a cushion that holds the body
away from the seatback is not recom-
mended.
o Do not operate vehicle with the head-
rests removed as severe injury to an
occupant may occur in the event of an
accident. Headrests may provide protec-
tion against severe neck injuries when
properly adjusted.
B090C01HP-GAT
Adjusting Seatback Angle
To recline the seatback, push the seatback
folding lever toward the headrest, and release it
after the desired seatback angle is achieved.
When you recline the seatback to desired posi-
tion, always be sure it has locked into position.
Seatback
folding lever
B090A01HP-1
Lock
Knob
