DO-IT-YOURSELF MAINTENANCE
6-25
If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using an
aiming screen as shown in the illustration. Turn
on the headlight switch. (Low Beam or High
Beam Position).
1. Adjust headlights so that main axis of light is
parallel to center line of the body and is
aligned with point "P" shown in the illustra-
tion.
2. Dotted lines in the illustration show the cen-
ter of headlights.
"H"
Horizontal center line of headlights from
ground :
Low Beam : 894 mm (35.1 in.)
High Beam : 839 mm (33 in.)
"W"
Distance between each headlight center :
Low Beam : 1,316 mm (51.8 in.)
High Beam : 1,076 mm (42.4 in.)
"L"
Distance between the headlights and the
wall that the lights are tested against :
Low Beam : 3,000 mm (118.11 in.)
High Beam : 3,000 mm (118.11in.)
G290B02HP
Vertical
line
Cut-off line
Ground line
L
W
H
H
"P"
21 mm
( 0.83 in.)
<High Beam>
Horizontal line
39 mm (1.54 in.)
Vertical
line
Cut-off line
Ground line
L
W
H
H
"P"
38 mm ( 1.5 in.)
14 mm (0.55 in.)
Horizontal line
G290B01HP-GAT
Adjustment After Headlight Assembly
Replacement
G290B01HP
<Low Beam>
