FEATURES OF YOUR HYUNDAI
1- 27
B230F02HP
B230D03E-GAT
Securing a Child Restraint System with
"ISOFIX" System and "Tether Anchor-
age" System
ISOFIX is a standardised method of fitting child
seats that eliminates the need to use the stan-
dard adult seat belt to secure the seat in the
vehicle. This enables a much more secure and
positive location with the added benefit of easier
and quicker installation.
An ISOFIX-seat can only be installed if it has
vehicle-specific approval in accordance with the
requirements of ECE-R44. For your Hyundai,
the Hyundai ISOFIX GR1 / Hyundai Duo / Römer
ISOFIX GR1 and the Römer Duo ISOFIX / Britax
Duo ISOFIX is approved according to the re-
quirement ECE-R44. This seat has been tested
extensively by Hyundai and is recommended for
your Hyundai.
NOTE:
At present, this seat is the only one comply-
ing with that provision. In case that other
manufacturers will furnish proof of a respec-
tive certification, Hyundai is going to evalu-
ate this seat carefully and will give a recom-
mendation provided that seat complies to the
law. Please ask your Hyundai dealer in this
respect.
On each side of the rear seat, between the
cushion and backrest, are located a pair of ISOFIX
anchorage points together with a top tether mount-
ing on the luggage compartment. During the
installing, the seat has to be engaged at the
anchorage-points in a way you can hear it click-
ing (check by pulling!) and has to be fixed with the
Top Tether-belt on the belonging point in the
luggage-compartment. The installing and the use
of a child-seat has to be done according to the
installing-manual, which is added to the ISOFIX-
seat.
B230D02HP-E
NOTE:
An ISOFIX-child-seat can only be installed if
the seat has a vehicle-specific approval ac-
cording to ECE-R44. Before using the ISOFIX-
child-seat, which was bought for another car,
ask your Hyundai-dealer whether this seat-
type is approved and recommended for your
Hyundai.
To secure the child restraint seat
1. To engage the child restraint seat to the
ISOFIX anchor, insert the child restraint seat
latch into the ISOFIX anchor. Listen for the
audible "click" sound.
2. Connect the tether strap hook to the child
restraint hook holder and tighten to secure
the seat. Refer to "Securing a Child Restraint
System with the Tether Anchorage System"
on page 1-25.
B230D01HP-1
ISOFIX Anchor
ISOFIX Anchor
Position Indicator
