FEATURES OF YOUR HYUNDAI
1- 23
B220D01HP-GAT
SEAT BELTS - Center Rear Seat 3-
Point System With Emergency Lock-
ing Retractor (If Installed)
1. Pull the seatbelt out of the roof panel.
2. Before fastening the rear seat center belt,
confirm the metal tab (a) and buckle (b) are
latched together.
3. After confirming that (a) and (b) are latched,
pull the seat belt out of the retractor and insert
the metal tab (c) into the buckle (d).
B220D01HP
There will be an audible "click" when the tab
locks in the buckle. The seat belt automatically
adjusts to the proper length only after the lap belt
is adjusted manually so that it fits snugly around
your hips. If you lean forward in a slow, easy
motion, the belt will extend and let you move
around. If there is a sudden stop or impact, the
belt will lock into position. It will also lock if you try
to lean forward too quickly.
WARNING:
o When using the rear seat center belt, you
must lock all metal tabs and buckles. If any
metal tab or buckle is not locked, it will
increase the chance of injury in the event
of collision.
o Never unlock the metal tab (a) and the
buckle (b) with the following exceptions.
(1) In case of folding rear seatbacks down.
(2) If transporting an object on the rear
seat may cause damage to the rear
seat center belt.
B220A02HP
o Lock the metal tab (a) and the buckle (b)
immediately after folding rear seatbacks
up.
o To disconnect the metal tab (c) from the
buckle (d), insert a sharp-ended tool into
the groove located on the buckle (d).
B220C01A-GAT
To Release the Seat Belt
When you want to release the seat belt, press the
button in the locking buckle.
WARNING:
The center belt latching mechanism is differ-
ent from those for the rear seat shoulder
belts. When fastening the rear seat shoulder
belts or the rear seat center belt, make sure
they are inserted into the correct buckles to
obtain maximum protection from the seat
belt system and assure proper operation.
B220D01HP-1
(a)
(b)
(c)
(d)
