WHAT TO DO IN AN EMERGENCY
3-6
D060F02HP
D060F02HP-GAT
6. Raising the Car
D060F01HP
o Open the lid at the left corner of the luggage
compartment.
o Loosen the hexagonal bolt, and then take
out the jack.
Ram
Hexagonal Bolt
Release
valve
D060E01A-AAT
5. Put the Jack in Place
The base of the jack should be placed on firm,
level ground. The jack should be positioned as
shown in the illustration.
D060E01HP-1
D060E02HP-1
Rear
Front
D060D01A-AAT
4. Loosen Wheel Nuts
The wheel nuts should be loosened slightly be-
fore raising the car. To loosen the nuts, turn the
wrench handle counterclockwise. When doing
this, be sure that the socket is seated completely
over the nut so it cannot slip off. For maximum
leverage, position the wrench so the handle is to
the right as shown in the illustration. Then, while
holding the wrench near the end of the handle,
pull up on it with steady pressure. Do not remove
the nuts at this time. Just loosen them about one-
half turn.
D060D01HP
