CONTROLS AND EQUIPMENT
1- 63
B570A02HP
DB370A2-E
BONNET RELEASE
B570A01HP.DAG
To open the bonnet, pull the release lever inside
the vehicle to unlatch the bonnet. At the front of
the vehicle, depress the safety catch as shown
and raise the bonnet by hand. When closing the
bonnet, slowly close the bonnet and make sure
it locks into place.
WARNING:
o Always double check to be sure that the
bonnet is firmly latched before driving
away. If it is not latched, the bonnet
could open whilst the vehicle is being
driven, causing a total loss of visibility,
which might result in an accident.
o Do not move the vehicle with the bonnet
in the raised position, as vision is ob-
structed and the bonnet could fall or be
damaged.
B580A01E-EAT
SUN-VISOR
B580A01HP.DAG
Vanity mirror
Sun visors are fitted to both the driver and
passenger side of the vehicle. Certain deriva-
tives are equipped with a vanity mirror which is
located on the back of the driver and passenger
visor. The visor may be lowered to reduce the
amount of glare from directly ahead, or may be
moved towards the side window to reduce glare
from the side of the vehicle, once the inner pivot
has been unclipped from the bracket.
NOTE:
The Supplemental Restraint System (SRS)
label containing useful information can be
found on the back of each sun visor.
WARNING:
Do not place the sun-visor in such a manner
that it obscures visibility of the roadway,
traffic or other objects.
