FEATURES OF YOUR HYUNDAI
1- 75
B970C02L-AAT
Automatic Operation
B970C01HP
The FATC (Full Automatic Temperature Control)
system automatically controls heating and cool-
ing as follows:
1. Push the "AUTO" switch. The indicator light
will illuminate confirming that the Face, Floor
and/or Bi-Level modes as well as the blower
speed and, air conditioner will be controlled
automatically.
2. Push the "TEMP" button to set the desired
temperature.
The temperature will increase to the maxi-
mum 32°C(90°F) by pushing on the button.
Each push of the button will cause the tem-
perature to increase by 0.5°C(1°F).
The temperature will decrease to the mini-
mum 17°C(62°F) by pushing on the button.
Each push of the button will cause the tem-
perature to decrease by 0.5°C(1°F).
NOTE:
If the battery has been discharged or discon-
nected, the temperature mode will reset to
Centigrade degrees.
This is a normal condition and you can change
the temperature mode from Centigrade to
Fahrenheit as follows;
Press the TEMP down ( ) button 3 seconds
or more with the AMB button held down.
Photo sensor
B970C02HP
NOTE:
Never place anything over the sensor which
is located on the instrument panel to ensure
better control of the heating and cooling
system.
The display shows that the unit of tempera-
ture is adjusted to Centigrade or Fahrenheit
(°C
→
°F or °F
→
°C).
HHP062A
