CONTROLS AND EQUIPMENT
1- 7
B070A01A-EAT
THEFT-ALARM SYSTEM
(Not all models)
This system is designed to provide protection
from unauthorized entry into the car. This sys-
tem is operated in three stages: the first is the
"Armed" stage, the second is the "Alarm" stage,
and the third is the "Disarmed" stage. If trig-
gered, the system provides an audible alarm
with blinking of turn signal lights.
B070B01O-EAT
Armed Stage
B070B02HP.DAG
Park the car and stop the engine. Arm the
system as described below.
UNLOCK
LOCK
B040G01HP-AAT
Central Door Locks (Not all models)
The central door locking switch is located on
the driver's arm rest. It is operated by depress-
ing the door lock switch. If any door is open
when the switch is depressed, the door will
remain locked when closed.
NOTE:
o When pushing the front portion of the
driver's door lock switch, all vehicle doors
will lock.
o When pushing the rear portion of the
switch, all vehicle doors will unlock.
o The central door locking is operated by
turning the key toward the front or rear
of the vehicle.
B040G01HP.DAG
1) Remove the ignition key from the ignition
switch.
2) Make sure that the bonnet and hatchback
door are closed and latched.
3) Lock the doors using the transmitter of the
keyless entry system.
After completion of the steps above, the turn
signal lights will blink once to indicate that the
system is armed
NOTE:
1) If any door, hatchback door or engine
bonnet remains open, the system will not
be armed.
2) If this happens, rearm the system as
described above.
CAUTION:
Do not arm the system until all passengers
have left the car. If the system is armed
whilst a passenger(s) remains in the car, the
alarm may be activated when the remaining
passenger(s) leaves the car.
LOCK
UNLOCK
