FEATURES OF YOUR HYUNDAI
1- 10
B060A03L-DAT
POWER WINDOWS
(1)
(2)
B060A01HP
The power windows operate when the ignition
key is in the "ON" position. The main switches
are located on the driver's armrest and control
the front and rear windows on both sides of the
vehicle. The windows may be opened by de-
pressing the appropriate window switch and
closed by pulling up the switch. To open the
window on the driver's side, press the switch(1)
halfway down. The window moves as long as
the switch is operated. To fully open the driver's
window automatically, press the switch fully
down. In automatic operation, the window will
fully open even if you let go of the switch. To stop
at the desired opening, pull up and release the
switch. In order to prevent operation of the
passanger front and rear windows, a window
lock switch(2) is provided on the armrest of the
driver's door. To disable the power windows,
press the window lock switch. To revert to
normal operation, press the window lock switch
a second time.
Replacement instructions:
Type A:
MSO-0048-1
Screwdriver
1. Carefully separate the case with a blade
screwdriver as shown in the illustration.
MSO-0048-2
Battery
Case
Type B:
HMXOM033-2
Transmitter
Case
HMXOM033-3
Battery
Hole
Battery cover
2. Remove the old battery from the case and
note the polarity. Make sure the polarity of the
new battery is the same(+side facing down),
then insert it in the transmitter.
1. Carefully separate the case with a phillips
screwdriver.
2. Take off the battery cover after separating the
transmitter.
3. Remove the old battery from the transmitter
with a blade screwdriver inserted in the hole
and note the polarity. Make sure the polarity
of the new battery is the same(+side facing
up), then insert it in the transmitter.
