CONTROLS AND EQUIPMENT
1- 76
B970C02L-EAT
Automatic Operation
The FATC (Full Automatic Temperature Con-
trol) system automatically controls the heating
and cooling by doing as follows:
1. Push the "AUTO" switch. The indicator light
will come on confirming that the Face, Floor
and/or Bi-Level modes as well as the blower
speed and air conditioner will be controlled
automatically.
Press the TEMP down ( ) button 3 seconds
or more with the AMB button held down.
The display shows that the unit of tempera-
ture is adjusted to Centigrade or Fahrenheit
(°C
→
°F or °F
→
°C).
photo sensor
HHP294B
2. Push the "TEMP" button to set the desired
temperature.
The temperature will increase to the maxi-
mum 90°F(32°C) by pushing on the bu-
tton. Each push of the button will cause the
temperature to increase by 1°F(0.5°C).
The temperature will decrease to the mini-
mum 62°F(17°C) by pushing on the bu-
tton. Each push of the button will cause the
temperature to decrease by 1°F(0.5°C).
NOTE:
If the battery has been discharged or dis-
connected, the temperature mode will reset
to Centigrade degree.
This is a normal condition and you can
adjust the temperature mode from Centi-
grade to Fahrenheit as follows;
NOTE:
Never place anything over the sensor which
is located in the car on the instrument panel
to ensure better control of the heating and
cooling system.
B970C01HP
B970C02HP
