![background image](http://html1.mh-extra.com/html/hyundai/99999-hm5065a/99999-hm5065a_installation-instructions-manual_2195897050.webp)
b) Turn volume control to left to
check rear speakers
operational.
c) Press volume control repetitively until screen shows wording,
Balance
.
d) Turn volume control to left to check
rear left speakers
operational.
e) Turn volume control to right to check
rear right speakers
operational.
f)
Press volume control repetitively until screen
shows wording, Fader.
g) Turn volume control to left to
check front speakers
operational.
h) Press volume control repetitively until screen shows wording,
Balance
.
i)
Turn volume control to left to check
front left speakers
operational.
j)
Turn volume control to right to check
front right speakers
operational
Note: Faulty Product.
If any of the above operational points fail to operate, such as:
•
Tuner operation.
•
CD Mechanism.
•
Fader control.
•
Balance control.
Do not complete the installation of the radio.
1.
Remove the radio from the vehicle.
2.
Repack the radio into it’s original packaging
complete with harness and owner’s manual and anti-
theft security code plastic card.
3.
Return the radio to the stores department for
packing and despatch to the HANZ.
4.
Please refer to operational procedures for the return
of faulty product back to the HANZ.
5.
Install a new radio following above procedures.
14. If complete operation is OK, continue the installation of radio into dash.
15. Press the radio firmly on the front at each
end
(See photo).
When you hear the sound of the
click-lock, this indicates the radio is locked into
the install sleeve.
•
If you cannot hear the click-lock sound, this
suggests the radio is not locked into
position.
•
Remove the radio. Check that the radio
harness is towards the rear and is not
impeding the insertion of the radio.
•
Re-insert the radio and push it firmly into
position until you hear the click-lock sound.
•
Confirm that the radio is secure.
16. Place the supplied dress ring over the front of
the radio and firmly press into position.
50