j) Turn volume control to right to check
front right speakers
operational
Note: Faulty Product.
If any of the above operational points fail to operate such as:
•
Tuner operation.
•
CD Mechanism.
•
Fader control.
•
Balance control.
Do not complete the installation of the radio.
1.
Remove the radio from the vehicle.
2.
Repack the radio into it’s original packaging complete with
harness and owner’s manual and anti-theft security code plastic
card.
3.
Return the radio to the stores department for packing and
despatch to the HANZ.
4.
Please refer to operational procedures for the return of faulty
product back to the HANZ.
5.
Install a new radio following above procedures.
14. If complete operation is OK, continue the installation of radio into dash.
15.
Press the radio firmly on the front at each
end (See photo).
When you hear the sound
of the click-lock, this indicates the radio is
locked into the install sleeve.
•
If you cannot hear the click-lock sound,
this suggests the radio is not locked into
position.
•
Remove the radio. Check that the radio
harness is towards the rear and is not
impeding the insertion of the radio.
•
Re-insert the radio and push it firmly into
position until you hear the click-lock
sound.
•
Confirm that the radio is secure.
16. Place the supplied dress ring over the front of
the radio and firmly press into position.
Please note: that the dress ring has a small
hole on one side. This hole side is meant
to be installed on the right hand side of the
radio. (See photo).
17. Place the owners manual and Anti-Theft
security code plastic card within its plastic
sleeve into the glove box.
18.
Anti-Theft warning window stickers.
These stickers are supplied with each unit. They need be installed on both front
windows.
38