c.
Confirm unit receives stations on both MW/AM and FM bands, if so,
tuner operation is successful.
12. Confirm CD Mechanism operation.
a. Please insert a CD into CD aperture. Confirm that CD mechanism is
operational.
b. To remove disc – press white eject button.
13. Confirm all four speakers are operational.
Fader and Balance control check.
a. Press volume control repetitively until screen
shows wording,
Fader.
b. Turn volume control to left to
check rear speakers
operational.
c. Press volume control repetitively until screen shows wording,
Balance
.
d. Turn volume control to left to check
rear left speakers
operational.
e. Turn volume control to right to check
rear right speakers
operational.
f. Press volume control repetitively until screen
shows wording,
Fader.
g. Turn volume control to left to
check front speakers
operational.
h. Press volume control repetitively until screen shows wording,
Balance
.
i.
Turn volume control to left to check
front left speakers
operational.
j. Turn volume control to right to check
front right speakers
operational.
Note: Faulty Product.
If any of the above operational points fail to operate, such as:
•
Tuner operation.
•
CD Mechanism.
•
Fader control.
•
Balance control.
Do not complete the installation of the radio.
1. Remove the radio from the vehicle.
2. Repack the radio into it’s original packaging complete with
harness and owner’s manual and anti-theft security code
plastic card.
3. Return the radio to the stores department for packing and
despatch to the HANZ.
4. Please refer to operational procedures for the return of faulty
product back to the HANZ.
5.
Install a new radio following above procedures.
14. If complete operation is OK, continue the installation of radio into dash.
15. Press the radio firmly on the front at each
end
(See photo).
When you hear the sound
of the click-lock, this indicates the radio is
locked into the install sleeve.
56