(Refer to removal procedure on
the next page)
Check that the
radio harness is towards the rear
and is not impeding the insertion of
the radio. Re-insert the radio and
push it firmly into position until you
hear the click-lock sound. Confirm
that the radio is secure.
15) Place the supplied dress ring over the
front of the radio and firmly press into
position.
Please note: that the dress ring has
a small hole on one side. This hole
side is meant to be installed on the
right hand side of the radio. (See
photo)
.
16) Place the owner’s manual and Anti-Theft
security code plastic card within its plastic
sleeve into the glove box.
17) Anti-Theft warning window stickers.
These stickers are supplied with each unit. They need be installed on both
front windows.
•
Driver’s side window is to be positioned on the lower left hand corner
on the inside of window.
•
Passenger side window is to be positioned on the lower right hand
corner on the inside of window.
•
Please take care that you install the stickers in a straight line parallel
with the top of door line.
3. REMOVAL PROCEDURE.
a) Using the supplied dress ring
removal Key, slide the thin end of
the key all the way into the right
hand side small hole, and hook-lift
this side of the dress out until you
can remove the dress ring by
hand. (See photo)
18
b) Using the supplied radio removal
keys, insert each key to the
extreme outside of the radio
between the radio and install
sleeve. (See photo)
Press the keys in until a clicking
sound can be heard, then gently
pull both keys towards the rear of