Please note: the following operation requires the use of tuner buttons in order of
(1) to (4) only.
a) Press tuner button number one (1),
seven times. (7)
b) Press tuner button number two (2),
nine times. (9)
c) Press tuner button number three (3),
six times. (6)
d) Press tuner button number four (4),
three
times. (3)
e) Check that the code shown on the screen is correct.
f)
Press tuner button number five (5)
once to activate the code
.
8)
Important:
If you have entered the incorrect anti-theft code or used an
incorrect procedure at your first attempt, the audio screen will exhibit the
following message “2 CDE”. This means you need to enter the code a
second time, taking care to follow the instructions and enter the correct
code.
9) If the stereo screen shows the message “3 CDE”, this means a 2
nd
incorrect
code was entered.
If a 3
rd
incorrect code in entered the audio unit will turn off. A period of at
least one hour must pass before attempting to re-enter the correct anti-
theft security code.
10) Confirm tuner operation for each band by:
a) Pressing the tune/seek button up or
down to search for the local MW/AM
stations. Once you have found a
station this will confirm the set is
operational MW/AM mode.
b) FM Radio. Press tune/seek button up
or down for a local FM station. Again,
when a station is selected, the tuner
operation is confirmed.
OPERATIONAL CHECKS
11)
Confirm CD Mechanism operation
.
a)
Please insert a CD into CD aperture. Confirm that CD mechanism
is operational.
b)
To remove disc – press the white eject button.
12) Confirm all four speakers are operational by performing the following checks:
a)
Press volume control repetitively until screen
shows wording,
Fader.
b)
Turn volume control to left to
check rear speakers
operational.
c)
Press volume control repetitively until screen shows wording,
Balance
.
d)
Turn volume control to left to check
rear left speakers
operational.
e)
Turn volume control to right to check
rear right speakers
operational.
f)
Press volume control repetitively until screen
shows wording,
Fader.
g)
Turn volume control to left to
check front speakers
operational.
6
h)
Press volume control repetitively until screen shows wording,
Balance
.