7.
Be sure the radio sits over the foam strip.
Ensure the strip is not pulled off the sleeve.
Do not
push the radio all the way into the
Locking position at this stage.
Ensure the radio is firmly into position
8.
You now need to confirm that all controls are
operational.
9.
Position transit fuse into operational mode.
This fuse is located in the interior fuse box
behind the N/S lower dash cover.
10. The Anti-Theft security code needs be
entered.
ANTI-THEFT SECURITY CODE INPUT PROCEDURE.
To activate the security code, please follow these steps.
1. Turn on the stereo.
2. If the stereo screen indicates “1 CDE”, this is a message that you need enter
the anti-theft security code.
3. The security code number can be found printed on the plastic card supplied
with the new audio unit.
4. Every Hyundai stereo has it’s own individual anti-theft security code.
Entering an incorrect code or using incorrect procedures will not activate the
stereo to the operational status.
5. The anti-theft code is made up of four computer-generated numbers.
6. An example code may be
7963
.
7. To enter code
7963
into the stereo, always follow these steps,
a) Press tuner button number one (1),
seven times. (7)
b) Press tuner button number two (2),
nine times. (9)
c) Press tuner button number three (3),
six times. (6)
d) Press tuner button number four (4),
three
times. (3)
e) Check that the code shown on the stereo screen is correct.
f) Press tuner button number five (5) once to activate the code.
8.
Important
: If you have entered the incorrect anti-theft code or used an
incorrect procedure at your first attempt, the stereo screen will exhibit the
following message “2 CDE”. This means you need enter the code a second
time taking care to follow these instructions and enter the correct code.
43