14. If complete operation is OK, continue the installation of radio into dash.
15. Press the radio firmly on the front at each end
(See photo). When you hear the sound of the
click-lock, this indicates the radio is locked into
the install sleeve.
•
If you cannot hear the click-lock sound,
this suggests the radio is not locked into
position.
•
Remove the radio. Check that the radio
harness is towards the rear and is not
impeding the insertion of the radio.
•
Re-insert the radio and push it firmly into
position until you hear the click-lock
sound.
•
Confirm that the radio is secure.
16. Place the supplied dress ring over the front of
the radio and firmly press into position.
Please note: that the dress ring has a small
hole on one side. This hole side is meant to be
installed on the right hand side of the radio.
(See photo
).
17. Place the owners manual and Anti-Theft
security code plastic card within its plastic
sleeve into the glove box.
Anti-Theft warning window stickers.
18. These stickers are supplied with each unit. They need be installed on both front
windows.
•
Driver’s side window is to be positioned on the lower left hand corner on
the inside of window.
•
Passenger side window is to be positioned on the lower right hand corner
on the inside of window.
•
Please take care that you install the stickers in a straight line parallel with
the top of door line.
4. REMOVAL
PROCEDURE.
1. Using the supplied dress ring removal Key,
slide the thin end of the key all the way into the
right hand side small hole, and hook-lift this
side of the dress out until you can remove the
dress ring by hand. (See photo)
45