small
piece of cardboard (as shown) to protect the
facia while levering.
3)
Disconnect the attached wiring harness and
aerial connector from the rear of the
blanking plate.
(See photo).
4) Connect the HM6065 wiring harness
connector to the vehicle wiring connector.
•
Check that the 1-amp fuse is secure in the
fuse holder of the HM5065 harness.
•
Check that all leads are firmly affixed into
the plug of HM5065 harness, except for the
pink ‘telephone mute’ wire, which does not
need to be connected.
5) Connect the aerial and HM5065 wiring
harness to the radio, ensuring that the
orange ‘illumination‘ wire from the audio
unit rear is connected to the ‘female’
orange wire in the HM5065 harness.
6) Insert the radio into the install sleeve.
Do
not
push the radio all the way into the
locking position at this stage. Insert the
radio into the install sleeve.
7)
You now need to confirm that all controls
are operational.
8)
The Anti-Theft code needs to be entered, to
do this, follow the instructions below.
PROCEDURE FOR ENTERING ANTI-THEFT SECURITYCODE.
To activate the security code, please follow these steps.
1) Turn on the unit.
7. If the unit screen indicates “1 CDE”, this is a message that you need to enter
the anti-theft security code.
3) The security code number can be found printed on the plastic card supplied.
4) Every Hyundai stereo has it’s own individual anti-theft security code.
Entering an incorrect code or using incorrect procedures will not activate the
stereo to an operational status.
5) The anti-theft code is made up of four computer-generated numbers.
6) For example the code may be
7963
.
7) To enter code
7963
into the audio unit, always follow these steps,
5