15.
Press the radio firmly on the front at
each end (See photo).
When you hear
the sound of the click-lock, this indicates
the radio is locked into the install sleeve.
•
If you cannot hear the click-
lock sound, this suggests the
radio is not locked into
position.
•
Remove the radio. Check that
the radio harness is towards
the rear and is not impeding
the insertion of the radio.
•
Re-insert the radio and push it
firmly into position until you
hear the click-lock sound.
•
If you still do not hear the
radio click into place, remove
the radio spring clips and fit a
set of modified spring clips
supplied by your Regional
Office. These clips maybe
identified by a dot of white
paint on each clip.
16. Place the supplied dress ring over
the front of the radio and firmly
press into position.
Please note: that the dress ring has
a small hole on one side. This hole
side is meant to be installed on the
right hand side of the radio. (See
photo)
.
17. Place the owner’s manual and
Anti-Theft security code plastic
card within its plastic sleeve into
the glove box.
18. Anti-Theft warning window stickers.
These stickers are supplied with each unit. They need be installed on
both front windows.
•
Driver’s side window is to be positioned on the lower left hand corner
on the inside of window.
•
Passenger side window is to be positioned on the lower right hand
corner on the inside of window.
•
Please take care that you install the stickers in a straight line parallel
with the top of door line.
4. REMOVAL
PROCEDURE.
24