•
Never insert the radio using force.
Ensure that the radio is slid into the locking position by
pressing only on the front outer ends of the unit. Please
ensure that the installer’s fingers and thumbs do not contact
the LCD panel at any stage in the installation process.
15) Confirm that the radio is secure & install the audio unit dress ring over the
front of the radio. Firmly press the dress ring into position, ensuring that the
removal hole is located on the right hand side.
16) Place the Owners manual and Anti-Theft security card within the plastic
sleeve supplied and place in the glove box.
17) Affix the Anti-theft warning labels onto the (inside) lower left corner of the
Drivers front window, and also to the lower right corner of the Passenger
front window, ensuring that the labels are parallel with the top of the door
line.
1. REMOVAL PROCEDURE.
1) Using the dress ring removal key
supplied, slide the thin end of the key
all the way into the removal hole on the
right hand side of the dress ring, and
hook-lift the dress ring out until you can
remove it by hand.
(See photo)
2) Using the two radio removal keys
supplied, insert each key between the
radio unit and install sleeve at each
end of the radio, and gently push the
keys towards the front of the vehicle
until a clicking sound can be heard.
(See photo)
3) Gently pull both keys towards the rear
of the vehicle to remove the audio unit
from the install sleeve.
4) Disconnect the audio unit wiring and
aerial connectors, and remove the
audio unit from the vehicle.
Note:
Care must be taken, not to damage the
audio unit wiring harness during removal.
12