49
2. If the stereo screen indicates “1 CDE”, this is a message that you need enter
your anti-theft security code.
3. The security code number can be found printed on the plastic card supplied
with the new audio unit.
4. Every Hyundai stereo has it’s own individual anti-theft security code. Entering
an incorrect code or using incorrect procedures will not activate the stereo to
the operational status.
5. The anti-theft code is made up of four computer-generated numbers.
6. An example code may be
7963
.
7. To enter code
7963
into the stereo, always follow these steps,
a. Press tuner button number one (1),
seven times. (7)
b. Press tuner button number two (2),
nine times. (9)
c. Press tuner button number three (3),
six times. (6)
d. Press tuner button number four (4),
three
times. (3)
e. Check that the code shown on the stereo screen is correct.
f. Press tuner button number five (5) once to activate the code.
8.
Important
: If you have entered the incorrect anti-theft code or used an
incorrect procedure at your first attempt, the stereo screen will exhibit the
following message “2 CDE”. This means you need enter the code a second
time taking care to follow these instructions and enter the correct code.
9. If the stereo screen shows the message “3 CDE”, this means a 2
nd
incorrect
code was entered.
10. If a 3
rd
incorrect code in entered the audio unit will turn off. A period of at
least one hour must pass before attempting to re-enter the correct anti-theft
security code number using the above procedures correctly.
11. Confirm tuner operation.
a. MW/AM Radio. Press tune/seek up or down control button to
seek the strongest radio stations.
b. FM Radio. Press tune/seek up or down control button to seek
the strongest radio stations.
c. Confirm unit receives stations on both MW/AM and FM bands, if
so, tuner operation is successful.
12. Confirm CD Mechanism operation.
a. Please insert a CD into CD aperture. Confirm that CD mechanism is
operational.
b. To remove disc – press white eject button.
13. Confirm all four speakers are operational.
Fader and Balance control check.
a) Press volume control repetitively until screen
shows wording, Fader.