are operational
Do not
push the radio
all the way into the Locking position at
this stage.
Position the radio on an angle to assist in
sliding over the foam strip.
The Anti-Theft security code needs be
entered.
9)
ANTI-THEFT SECURITY CODE INPUT PROCEDURE.
To activate the security code, please follow these steps
.
a) Turn on the stereo.
b) If the stereo screen indicates “1 CDE”, this is a message that you need
to enter the anti-theft security code.
c) The security code number can be found printed on the plastic card
supplied.
d) Every Hyundai stereo has it’s own individual anti-theft security code.
Entering an incorrect code or using incorrect procedures will not activate
the stereo to an operational status.
e) The anti-theft code is made up of four computer-generated numbers.
f)
For example the code may be
7963
.
g)
To enter code
7963
into the stereo, always follow these steps,
Please note: the following operation requires the use of tuner buttons in order of
(1) to (4) only.
I.
Press tuner button number one (1),
seven times. (7)
II. Press tuner button number two (2),
nine times. (9)
III.
Press tuner button number three (3),
six times. (6)
IV. Press tuner button number four (4),
three
times. (3)
V. Check that the code shown on the stereo screen is correct.
VI.
Press tuner button number five (5)
once to activate the code
.
a)
Important:
If you have entered the incorrect anti-theft code or used an
incorrect procedure on the first attempt, the stereo screen will exhibit
the following message “2 CDE”. This means you need to enter the
code a second time, taking care to follow these instructions and enter
the correct code.
b) If the stereo screen shows the message “3 CDE”, this means a 2
nd
incorrect code has been entered.
c)
If a third incorrect code is entered the stereo will turn off. A period of at
least one-hour must pass before attempting to re-enter the correct anti-
theft security code number using the above procedure.
10) Confirm tuner operation.
a) AM Radio. Press tune/seek button
up or down to search for local
MW/AM stations. Once you have
found a station this will confirm the
set is operational in this mode.
b) FM Radio. Press tune/seek button
up or down to search for a local
FM station. Once you have found
16