![background image](http://html1.mh-extra.com/html/hyundai/99999-hm5065a/99999-hm5065a_installation-instructions-manual_2195897047.webp)
99999 – HMCON001
Radio Wiring Harness
(Supplied with audio unit)
Foam Strip
(Supplied with audio unit)
3. SERVICE
PROCEDURE
1. Remove the radio blanking plate, by carefully
inserting a thin flat blade screwdriver 45mm
inwards from the top edge of the plate on
both sides .
(See photo).
45mm
45mm
NOTE
- Avoid damaging the upper center
Facia.
Insert the screwdriver 45mm inwards from
the top edge, on both sides and remove
blanking plate with your fingers.
2. Disconnect the attached wiring harness and
aerial connector from the rear of the blanking
plate.
(See photo).
Discard the blanking plate.
47
3. Insert the supplied foam strip onto the bottom
surface of the radio sleeve. Ensure the gap
between the strip and the cradle is even on
both sides of the foam strip. Firmly press
down on the strip.
(See photo).
Ensure both gaps are even