![background image](http://html1.mh-extra.com/html/hyundai/99999-hm5065a/99999-hm5065a_installation-instructions-manual_2195897011.webp)
11
that the set is operational in MW/AM
mode.
b) Press tune/seek button up or down for a
local FM station. Again, when a station is
selected the tuner operation is confirmed.
12) Confirm CD Mechanism operation
.
a) Please insert a CD into CD aperture. Confirm that CD mechanism is
operational.
b) To remove disc – press the white eject button.
13) Confirm all four speakers are operational by performing the following checks:
a) Press volume control repetitively until screen
shows wording, Fader.
b) Turn volume control to left to
check rear speakers
operational.
c) Press volume control repetitively until screen shows wording,
Balance
.
d) Turn volume control to left to check
rear left speakers
operational.
e) Turn volume control to right to check
rear right speakers
operational.
f) Press volume control repetitively until screen
shows wording, Fader.
g) Turn volume control to left to
check front speakers
operational.
h) Press volume control repetitively until screen shows wording,
Balance
.
i) Turn volume control to left to check
front left speakers
operational.
j)
Turn volume control to right to check
front right speakers
operational
Note: Faulty Product.
If any of the following functions fail to operate,
a. Tuner operation.
b. CD Mechanism.
c. Fader control.
d. Balance control.
Do not complete the installation of the radio
1. Remove the radio from the vehicle.
2. Repack the radio into it’s original packaging complete with
harness and owner’s manual and anti-theft security code plastic
card.
3. Return the radio to the parts department for packing and
despatch to the HANZ.
4. Please refer to operational procedures for the return of faulty
product back to the HANZ.
5. Install a new radio following above procedures.
14) Complete the installation of radio (after all of the above functions have been
confirmed to be operational), by pressing the radio firmly on the front at
each
end. When you hear the sound of the click-lock, this indicates the radio is
locked into the install sleeve.
Note:
If the radio does not easily slide all the way into the ‘locking’
position, remove the radio from the Install sleeve, or lower the glove
box assembly and reposition the radio wiring harness to allow for
easier installation.