HYRobotics NEXIA-SY Series, User Manual, Page: 64 / 203

4. Operation
46 NEXIA-SY Series User Manual
4.6 Mold File
(1) Description
This creates, opens and copies Mold File, changes Mold File name, and changes jig.
2 Mold: W1 MoldFile
NO Mold
1 COCK
2 W1
3 CUP
4 ANYCALL
5 CASE1
6 MATIZ
1 COCK
(2) Button Fuction
NO Button Description
1 Selects Mold File by moving focus up and down.
2 Moves to New Mold screen which creates new mold.
3 Opens Mold File where focus is located.
4
Moves to Mold Copy screen which copies data of Mold File where focus is
located.
5
Moves to Change Name screen which changes name of Mold File where focus
is located.
6
Cancels Mold File.
Pressing cancel button displays a message [cancel mold name?], and [yes]
cancels it and [no] does not cancel it.
In case [YES] or [NO] is pressed, message window disappears.
7 Moves to EOAT Change screen which changes jig.
8 Moves to Main screen.
9 Moves to Step Setup screen.
10 Move to Mold Select screen