HYRobotics NEXIA-SY Series, User Manual

Page: 155 / 203

5. Follow Up
NEXIA-SY Series User Manual 137
5.11 Step Operation
2 Mold: W1 StepSet
NO S T E P
2 TkPos
3 AscPos
4 RelPos
1 WaitPos
STEP 31
Press to run robot go to next step.
After RelPos set up, press StepFw will finish one
cycle and go back to first cycle.
2 Mold: W1 StepSet
NO S T E P
2 TkPos
3 AscPos
4 RelPos
1 WaitPos
STEP 32
Run Step by Ste to confirm all position and setting
is right.
Press will run step with slow speed.
will be changed to
2 Mold: W1 StepSet
NO S T E P
2 TkPos
3 AscPos
4 RelPos
1 WaitPos
STEP 32
During Step operation
Press will stop operation
will be changed to
Press to run in Fully Automatic Mode
will not activate until finish the 1 step
operation ( after change mold, or reboot system )