HUSTLER SmoothTrak X-ONE, Operator'S Manual, Page: 152 / 452

REV B 4-10 606528CE
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
NOTES:
1.
Initial engine oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours operation. Change more often under dusty or
dirty conditions and during hot weather periods.
2.
Torque initially and after first 2 hours of operation.
3.
Perform
initial
hydraulic oil and filter change after 50 hours (one week) of operation. Thereafter, change oil and filter annually or every 500 hours
(750 hours for Parker HT-1000 oil) whichever comes first.
4.
Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual for recommendations and other
maintenance items.
5.
Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in the engine. Do not clean filter
element. Replace with a new one.
6.
Pump drive belt only - Inspect belt every 100 hours and replace if worn or cracking is noticed. Check spring tension adjustment. Otherwise,
replace belt every 400 hours or 2 years whichever comes first. Check and adjust spring tension after 50 hours of use as outlined in the Hydraulic
Pump Belt Adjustment section of the General Service Manual (123499).
7.
Check fuel system for any cracks or leaks including, but not limited to, fuel line hoses, fuel valve, vent line hoses, vent valve, vapor valve, carbon
canister, and grommets. Replace as needed.
Maintenance Schedule
Refer to Figure 4-18, Figure 4-19, Figure 4-20, & Figure 4-21
SERVICE AT
INTERVALS INDICATED
WEEKLY
OR 50
HOURS
MONTHLY
OR 100
HOURS
* ANNUALLY
OR 500
HOURS
Verify safety start interlock system Prior to each use
Visually inspect unit for loose hardware and/or damaged parts Prior to each use
Visually inspect tires Prior to each use
Check oil level, engine (1)(4) Prior to each use or every 4 hours
Clean air intake screen (8) Prior to each use or every 4 hours
Check fuel level Prior to each use
Blades - sharpen & securely fastened Prior to each use
Discharge chute - securely in place & in lowest position Prior to each use
Rear discharge deck flaps and/or power unit deflector securely in place Prior to each use
Clean engine and pump compartment (11) Daily
Check air cleaner service indicator (8) Daily
Replace engine air cleaner element (5)(10) As needed
Change engine oil and filter (1) (4) X
Clean cylinder and head fins (10) X
Check battery connections (11) X
Check tire pressure with a gauge X
Check hydraulic oil level (11) X
Clean engine exterior (10) X
Tighten lug nuts on wheels (2) X
Grease deck pusher arms (8) X
Grease pump idler (8) X
Grease deck height pivots (8) X
Grease front wheel bearings (8) X
Clean & regap spark plugs (10) X
Check pump and deck belt tension and condition (6) (11) X
Check fuel system (7) (11) X
Check fuel valve (7) X
Check fuel tank grommets (7) X
Change fuel filter (7) X
Change hydraulic filter & oil (3) (11) X
Grease deck spindle housings X
Replace spark plugs (10) X
Check ROPS mounting hardware (9) X
Replace fuel evaporation system filter (8) (11) X