Huawei G5500 User Manual Download Page 91

Page: 91 / 215

Figure 5-8

Initial configuration process

Start

Configure the iBMC.

Check the G560.

og in to the remote virtual

console.

End

onfigure RAID.

Configure the BIOS.

Install an OS.

Table 5-7

describes the initial configuration process.

Table 5-7

Configuration process

Step

Action

Check the G560.

Check the version information of the G560 and ensure
that the version information meets site requirements.

Check for alarms about the G560.

Configure the iBMC.

Change the default password for the iBMC.

Configure the iBMC IP address for the G560.

Remote Control

page.

Configure RAID.

The G560 supports two RAID controller cards:

LSI SAS3008: supports RAID 0 and 1.

LSI SAS3108: supports RAID 0, 1, 5, 6, 10, 50, and
60.

Configure the basic input/
output system (BIOS).

Configure the G560 BIOS settings, including the boot
mode, BIOS password, and Preboot Execution
Environment (PXE) options for network interface cards
(NICs).

FusionServer G5500 Server
User Guide

5 Configuring the G5500

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Summary of Contents for G5500
























































































































































































































Search results

Summary of Contents for G5500

Reviews:

Related manuals for G5500

Brands by name

Popular brands

Huawei G5500, User Manual

Search results

Summary of Contents for G5500

Reviews:

Related manuals for G5500

Brands by name

Popular brands