manualshive.com logo in svg

Huawei G5500, User Manual

Share
Download
Huawei G5500 User Manual Download Page 73

3.

Insert the G530 V2 horizontally into the chassis. See (3) in 

Figure 4-20

.

4.

Close the ejector lever on the G530 V2. See (4) in 

Figure 4-20

.

Step 4

Check the indicator status after the G530 V2 is powered on.

For details, see 

2.3 Front Panel Indicators and Buttons

.

----End

4.5 Installing an I/O Module

The G5500 is connected to the external network through the I/O module. If the I/O module is
not installed, install it in the I/O module slot of the G5500 before installing the G5500.

l

For details about I/O modules, visit 

Server Compatibility Checker

.

l

The NICs on the G5500 must be compatible with I/O modules.

For details about installing an I/O Module, see 

6.7 I/O Module

.

4.6 Internal Cabling

4.6.1 SAS Cable

 

Table 4-2

 Cable description

Cable

Description

BOM Number

SAS cable

Connects the RAID
controller card to a
mezzanine card.

04052026

FusionServer G5500 Server
User Guide

4 Setup

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

65

Summary of Contents for G5500
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands