manualshive.com logo in svg

Huawei G5500, User Manual

Share
Download
Huawei G5500 User Manual Download Page 154

2.

Align the triangle hole on the CPU carrier with the triangle mark on the CPU, and place
the CPU carrier downloads. See (1) in 

Figure 6-28

.

Figure 6-28

 Installing the CPU and conjoined heat sink

3.

Check that the CPU is securely installed and level with the carrier. Press down to secure
any raised parts.

Step 8

Paste thermal compound.
1.

Check that the CPU surface is clean. Use a tissue to clean off any residual thermal paste.

2.

Determine the area on the CPU that will be in contact with the heat sink, and evenly
paste 0.4 ml of thermal compound on the area.

NOTE

The thermal compound injector has volume marks.

Figure 6-29

 shows the methods for pasting thermal compound.

Figure 6-29

 Pasting methods

中间一点法

一字法

二字法

十字法

五点法

S

形法

FusionServer G5500 Server
User Guide

6 Optional Part Installation

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

146

Summary of Contents for G5500
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands