manualshive.com logo in svg

Huawei G5500, User Manual

Share
Download
Huawei G5500 User Manual Download Page 68

4.4.3 Installing a GP316

Step 1

Before installing a GP316, ensure that no G530 V2 is installed.

Step 2

Unpack the packing case.
1.

Check whether the packing case and seals are in good conditions.

NOTE

If there is any damage (for example, the package is soaked or deformed, or the seals or pressure-
sensitive adhesive tapes are not intact), submit a 

Cargo Problem Feedback Form

.

2.

Use a box cutter to cut the pressure-sensitive adhesive tape on the packing case.

CAUTION

Be careful with the box cutter to avoid personal injury or equipment damage.

3.

Unpack the GP316.

4.

If there are multiple GP316s, take them out from ESD bags and place them separately on
the ESD floor, as shown in 

Figure 4-13

.

Figure 4-13

 Correct operation

NOTE

Do not take out a GP316 from its ESD bag if you do not install it immediately.

FusionServer G5500 Server
User Guide

4 Setup

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

60

Summary of Contents for G5500
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands